Call For Papers

2021 1st International Conference on Power Electronics and Energy (ICPEE-2021)

Dear Researcher

On behalf of the ICPEE 2021 organizing committee, we take this opportunity to invite you to participate in this professionally enriching flagship technical conference jointly organized by KIIT Deemed to be University, Bhubaneswar, and  IEEE Bhubaneswar Sub-Section, Odisha. The ICPEE2021 will be held at KIIT Deemed to be University, Bhubaneswar on January 2-3, 2021. ICPEE 2021 will have 12 Technical Tracks covering multiple domains. The eminent international speakers from the US, Europe, and premier National research and Industrial Organizations will deliver talks and conduct workshops and tutorials. During this international conference, the prospective researchers will have the opportunity to present their own work in the form of an oral presentation or an interactive presentation, apart from taking the advantage of the talks by a number of international experts. You are requested to upload your paper limited to a maximum of six pages through the paper submission link. The authors can download the format from the  IEEE paper format link given in the website.

Technical Tracks
Broad Areas
Description
Track-1
Power Electronics and Drives
  • Emerging topologies of power electronic converters
  • Modeling of Devices, Device Drivers, thermal issues, Solid-State Circuits, Circuits and Systems, Consumer Electronics
  • Micro and Nano electronics, photonics
  • Analysis and Design of rotating and linear machines
  • Industrial Electronics
  • Industrial drives Converters and Control by sensors.
  • Modelling, Control and System Integration
  • Embedded Power converters
  • Power Electronics for Education
  • Power electronics Devices in aerospace
  • Power Electronic Devices for Health Care
Track-2
Power Quality
  • Power System Reliability, Regulation and Monitoring with Control and Protection, Power Quality Standards and Regulation
  • Advanced power quality monitoring
  • Passive and Active power conditioners for control of active and reactive power,
  • Advanced Control techniques and AI control for power quality improvement (power theories, signal processing technics, artificial neural networks)
  • Biomedical Applications
Track-3
Electric Vehicle and Charging Infrastructure
  • Electric vehicle battery chargers with smart operation modes (grid-to-vehicle, vehicle-to-grid, vehicle-to-home, home-to-vehicle)
  • Modeling, control and simulation of the power electronic system in Electric Vehicles, Electric Ships and Electric Aircrafts
  • Multi-level converters for EV applications
  • Charging methods and standard
  • EMI issues in EV chargers
  • Future of Hybrid vehicles
Track-4
Renewable Energy and Grid Integration
  • Connection of Offshore Renewables to the Grid and their Challenges
  • Integration of renewable energy systems with power quality ancillary services (voltage control, harmonics compensation)
  • Analyzing the Impact of Renewable Energy Resources on Power System Operations
  • Forecasting of Renewable Energy Sources for Energy Management
  • Control and Protection Techniques of Grid Integrated Renewable Energy Sources
  • Islanding operation of Distributed Generation Systems
  • Green communications
  • PV systems monitoring and diagnosis by using soft computing
  • Techno-economics of PV systems
  • IoT applications in the Renewable Energy sector
  • Big data analytics in the Energy Sector
  • Data Analysis Challenges in the Future energy market
Track-5
Energy Conversion and Management System
  • Analysis of energy conversion, Energy conversion in future power and transportation systems
  • Efficiency, environmental impact, and performance
  • Fossil fuels, hydrogen, nuclear and renewable resources
  • Fuel reforming, hydrogen, and synthetic fuel production
  • Demand-side management, Supply-side Management, Sustainable development of Energy, Input-Output energy Analysis, Water and environment systems, Energy conservation
  • Energy management and control
  • Industry-Specific Energy Conversion and Conditioning Technologies
  • Energy conversion and conditioning technologies in the industry (cement, steel, paper, textile, mining)
  • Power-to-Gas: Hydrogen and Fuel Cells
  • Small Hydro Power, Tidal and Wave Power, Bio-Energy and Utilizing of Waste Materials as a Source of Alternative Energy
Track-6
Power Converter and Control using AI Techniques
  • Artificial & Augmented intelligence and their applications to power electronics,
  • Uses of communication, signals, images with and without wireless technique for remote control of power electronics-based applications
  • Advanced control techniques such as adaptive, predictive control with Reliability, Estimation, identification, and optimization of power quality issues of power electronics circuit applications.
  • Advances in Pulsed power technology
  • Switched-mode power supply design for aviation and space technology
  • Power electronics converter for biomedical instruments,
  • Multi-micro-grids, induction heating, defence applications, Navigation and guidance, Surveillance of aircrafts
Track-7
Energy Storage Technology
  • Battery management systems
  • Energy storage systems with power quality ancillary services (energy storage technologies, voltage support, reactive power control, active damping control)
  • Energy Storage Technologies and Applications.
  • Fuel Cell modeling and its Control Schemes.
  • Hybrid Energy Storage Systems.
  • Bioelectrochemistry and Chemical Energy Storage Systems
  • Centralized and Decentralized Storage Systems.
  • Thermal and Mechanical Energy Storage Systems.
  • Energy Storage in Building Materials
  • Biological and other Novel Energy Storage Systems.
  • Superconducting Magnetic Energy Storage Systems.
Track-8
Energy Generation Technology and Control
  • Intelligent control of Renewable Energy Sources (RES)
  • New Ancillary Services supported by energy storage and RES
  • Forcasting applications for Wind and PV Generation
  • Photoelectrochemical solar energy conversion, Organic Solar Cells
  • Geothermal Energy and Power Development
  • Optical communication and networks
  • Photonic devices and systems
  • Optical material and technology
  • Nano and bio photonics
  • Optical sensors and MEMS
  • Optical signal processing and computing
  • Non linear optics and quantum photonics
Track-9
Microgrid and Smart grid
  • Power quality in smart grids and microgrids (islanding detection, grid synchronization, voltage control, frequency control)
  • Micro-grid Architecture and control
  • Smart Grid Monitoring, Syncro Phasor Measurement (Phasor measurement units, Phasor estimation, and Dynamic Phasor estimation)
  • Fault detection techniques, Digital relays for Smart Grid protections; relay co-ordination
  • Signal Processing and Interfaces in Power systems
  • Requirements and Standards for Cyber and Physical Security in Electric Systems
  • Power System Resiliency to Cyber and Physical Attacks, Smart meters,
  • Communication of distributed energy and microgrid
  • Cybersecurity in Smart Grids
  • Cyber-physical systems perspective on decentralized energy management
  • Cyber-physical social system with parallel learning for distributed energy management of a microgrid
Track-10
Distributed Generation
  • Distributed generation systems and technologies
  • Islanding detection, protection and standard of DG systems
  • Energy policy and public policy issues relating to power electronics based distributed and sustainable generation systems.
  • Advantages of distributed generation systems
  • On-site renewable energy systems
  • Grid parity, integration with the grid and micro-grid
  • Cogeneration and energy storage
  • Distributed generation in solar power, wind power, and hydro power systems
  • Waste-to-energy
  • Stand-alone hybrid systems
  • Legal requirements for distributed generation
  • Hybrid power systems
  • Micro combined heat and power
  • Sensor Array & Multichannel Signal Processing
  • Signal Processing through Machine learning for Communication, Networking, Cyber Security, Industrial applications and smart system
Track-11
Computational Intelligence for Smart Power
  • Big Data and Software Engineering for Smart Power
  • Artificial intelligence & Machine Learning
  • Distributed and Parallel Computing
  • Modeling and Simulation for Smart system
  • Optoelectronics, Displays, and Imagers
  • Swarm Robotic
  • Application of Machine Learning and AI for Robotics, Drones, Defence, surveillance including Bio-instrumentation and Agriculture
  • Image Processing, Vision and Recognition
  • Controls and Supervisory systems
  • Intelligent Autonomous Systems
  • Mechatronics and Systems including Modeling, Simulation, and Architecture
Track-12
Technologies for Sustainable Energy
  • Sustainability and green management challenges
  • Industry 4.0
  • Power Devices
  • Process and Manufacturing Technology
  • Circuit and Device Interaction
  • Characterization, Reliability, and Yield
  • Compound Semiconductor and High-Speed Devices
  • Memory Technology
  • Bio/Nano Sensing
  • Nanodevices for Biomedical Instruments
  • Human-Robot Interaction and Interfaces
  • Energy Policies and Standards
  • Wide Band Gap Devices
  • Illumination Technology
  • Sustainable Energy Technologies and Systems
  • Energy sustainability in the building sector
  • Sustainability and Society Socio-economic and Policy Issues

    Paper Submission

    Huge Discount on Registration Fee to Authors who will submit their paper early and will not wait for last date of submission.
    Paper Submission Date
    Paper Registration Date*
    Discount on Registration Fee**
    Till June 01, 2020
    Till June 15, 2020
    40%
    Till June 15 , 2020
    Till June 30, 2020
    30%
    Till June 30, 2020
    Till July 10, 2020
    20%
    Attention: As per the situation prevailed during the ICPEE-2021, Virtual Mode of presentation may be allowed.

    Note (Early Bird Registration)
    *The paper submitted under the discounted scheme will be reviewed by the same pool of reviewers of the ICPEE-2021 and provisionally acceptance letter will be communicated to the authors to get registered as per the deadline and other rules and regulations are applicable similar as regular paper.

    **Available on registration Page

    Guidelines for Submission

    • Paper Submission link is active from 1st May 2020.
    • The language of the text should be in English only.
    • IEEE ICPEE-2021invites researchers, practitioners, and students worldwide to submit previously unpublished original papers for consideration to be presented at the conference. 
    • A peer-review process will be used to evaluate all the submitted papers through the Paper Submission Link given below. Paper submission is limited to Maximum Six Pages including figures and references. The conference reserves the right to refrain from reviewing papers that are significantly longer than six
    • All submitted papers to ICPEE2021 will go through a plagiarism check and will be peer-reviewed by a set of reviewers. Papers with similarity scores of 30% or above are liable to be rejected without further review.

    Microsoft CMT Guide

    How to use Microsoft CMT? Click here

    Paper Template

    BEST PAPER AWARDS ICPEE

    • Best Paper Award: INR 5,000 + Certificate + Memento
    • Track Best Paper Award: INR 2,000 + Certificate + Memento for each track
    We assure you of an international technically enriched and vibrant experience at ICPEE-2021 in Bhubaneswar, India. We look forward to welcoming you to ICPEE-2021 and we are sure your experience at this conference will be a rewarding and memorable one.

    Connect with us

    KIIT University, Chandaka Industrial Estate, Patia, Bhubaneswar, Odisha-751024

    For Updates on Conference

    Enter your email and we'll send you more information

    © Copyright ICPEE 2021. All Rights Reserved